Audience voting at awards ceremonies: how “one PIN, one vote” works
When an organisation contacts us about an awards ceremony, the question is rarely technical. It usually sounds like this: “we want the audience to vote live, but nobody must be able to say afterwards that the result was rigged”.
The short answer: an audience voting system on attendees’ own phones, with an anonymous single-use PIN for each person. Every attendee is handed a code, votes from the browser without installing anything, and the results appear on the screen in the room straight away. One PIN, one vote.
Not every vote needs that level of control, though. For a talk or an internal meeting, an open poll is enough. In this article we explain how to tell the two apart, and what we have learnt running our system at awards ceremonies, conferences and company meetings.
In short
- An audience voting system lets people vote from their phones and see the results live on the event screen.
- For polls during a talk or an internal meeting, an open vote with a QR code or a shared event PIN is enough.
- When the result must be beyond dispute, as at an awards ceremony, use “one PIN, one vote”: anonymous single-use codes handed out in person.
- Compared with voting keypads (clickers), phones are cheaper, easier for the audience and give you more freedom in how results are shown.
- If the vote has legal effects, as at a shareholders’ meeting, your articles of association and the applicable law come first: check them before choosing a tool.
What is an audience voting system?
An audience voting system is a way for people at an event to vote live from a device, usually their own phone, and see the outcome immediately, either on the screen in the room or shared over a video call.
It covers very different situations: choosing the winner of an audience award, gauging opinion during a talk, deciding between proposals in a team meeting or running quick questions in a training session. It is one of the pieces of event technology that makes most sense when you want the audience to take part.
What changes from one case to another is not the technology but how much it matters that each person votes only once. That decides which mode makes sense.
Open vote or “one PIN, one vote”: how to choose
The key question before setting up a vote at an event is this: if someone voted twice, would it be a problem? If not, an open vote is enough. If it would, you need one code per person.
Open vote: for talks, conferences and internal meetings
Attendees join by scanning a QR code or typing the web address and the event PIN, which is the same for everyone. They vote, see the result and the session moves on.
This is what we usually set up at conferences and internal meetings: taking the temperature of the room before a debate, choosing between options or checking what the audience has understood. What matters here is that lots of people take part quickly, not policing every single vote.
“One PIN, one vote”: for awards ceremonies and votes you need to be able to defend
At a live awards ceremony, the result is announced in front of the nominees, the audience and often the press. If anyone suspects that people voted more than once, the award loses its value.
That is why, in this mode, each attendee receives a PIN that is unique to the event. It is the option our clients come back for most, especially for live awards ceremonies such as the CEEI Awards.
| Open vote | “One PIN, one vote” | |
|---|---|---|
| Access | QR code or web address and a shared event PIN | Personal, anonymous, single-use PIN |
| Can someone vote twice? | It is not designed to prevent it | No: each PIN is good for one vote |
| Is the vote anonymous? | Yes | Yes: the PIN is not linked to any name |
| Best for | Talks, conferences, training, team meetings | Awards ceremonies, committees, audience votes alongside a jury |
| Preparation | Minimal | Generate and print the PINs, hand them out at the door |
How PIN voting works at an awards ceremony
The “one PIN, one vote” system works in four steps, and none of them requires the audience to install an app.
- The PINs are generated. The system creates a list of codes unique to the event. The list is fully configurable and adapts to each event.
- The organisers print them and hand them out in person. Each organisation does it in the way that suits it best: on cards, in envelopes, with the delegate badge or on the seats. Because the PIN is handed over in person and is not tied to any name, the vote is anonymous.
- The audience votes from their phones. They open the voting page in the browser via a QR code or web address, enter their PIN and vote. They can vote for one or several nominees, even one after another, without identifying themselves again.
- The results are shown live. The organisers display a blind chart on screen, which shows the vote progressing without revealing the winner too early. Afterwards, they can download the participation statistics.
One important consequence: nobody can vote remotely unless they have been given a PIN. Anyone who is not in the room has no code, so they cannot vote. That is exactly what you want for an in-person audience award.
Voting keypads or phones: what event organisers tell us
Voting keypads, or clickers, have long been the standard way to vote live. They work, but the organisers we work with keep raising the same three issues:
- They are much more expensive. You need one keypad per attendee, which has to be hired, handed out and collected.
- They are more complicated to use, both for the audience and for the organisers.
- They limit how information is presented on the event screen.
With attendees’ own phones, the cost does not grow with every extra voter, people already know how to use them and the results are displayed with the event’s logo, colours and format. The one thing to watch is connectivity in the room, as we explain below.
| Method | Cost | Ease for the audience | One vote, anonymous | Live results |
|---|---|---|---|---|
| Show of hands | None | High | Not anonymous | Counted by hand |
| Paper ballots | Low | High | Yes, if the ballot box is controlled | No: needs counting |
| Voting keypads | High (one per person) | Medium | Yes, if each keypad goes to one person | Yes, limited format |
| Phones, open vote | Low | High | Anonymous, no single-vote control | Yes |
| Phones, “one PIN, one vote” | Low | High | Yes | Yes, customised |
What to prepare before the event
A live vote goes well when it is planned as part of the event running order. This is what we go through with each organisation:
- Questions and nominees, finalised in advance. The system lets you change them live, but it is better not to have to.
- How many PINs you need and how they will be handed out, with a few spare codes for the unexpected.
- Connectivity in the room. People vote using mobile data or the venue Wi-Fi; in rooms with poor coverage, it is worth offering a network for attendees.
- A full rehearsal with the actual event screen, ideally the day before.
- Where the vote sits in the running order: who announces it, how long people have to vote and when the results are shown.
With that in place, the platform can be ready in around 24 hours.
When this system is not what you need
The “one PIN, one vote” system is designed for in-room votes: audience awards, committees, association meetings or consultative votes. It does not replace a voting system with legal validity.
If you are voting on resolutions at a shareholders’ meeting, or at any assembly whose outcome has legal effects, start by checking what your articles of association and the applicable law say about how votes are cast and how each voter is identified. In those cases you may need to identify every voter, which is incompatible with an anonymous PIN.
And if what you want is for the audience to ask questions rather than vote, the right tool is an audience Q&A system, where a moderator decides which questions go on screen.
Frequently asked questions about audience voting at events
Does the audience need to download an app to vote?
No. Attendees open the voting page in the browser on their phone or computer by scanning a QR code or typing a web address, then enter the event PIN or their personal PIN. There is nothing to install and no sign-up.
How do you make sure each person votes only once?
With the “one PIN, one vote” mode. The system generates a list of unique codes for the event, the organisers print them and hand one to each attendee in person, and each code is valid for a single vote. Without a PIN, you cannot vote.
Is PIN voting anonymous?
Yes. The PINs are not linked to any name or personal data: they are generated at random and handed out in person. The organisers know how many codes have been used, but not who voted for what.
Can people vote for several nominees in a row?
Yes. With the same PIN, an attendee can vote in several categories or for several nominees, one after another, without identifying themselves again. The organisers decide which vote is open at any given moment.
Is it cheaper than hiring voting keypads?
Usually, yes, because there is no device to hire and hand out to each attendee: everyone uses their own phone. Results are also shown with the event’s branding, which tends to be more limited with keypads.
A live vote should be easy for the audience and beyond dispute for the organisers
That is the combination anyone running an awards ceremony is looking for: voting should take a second, and nobody should be able to question the result. With an anonymous PIN per person and results on screen, you can have both without keypads or ballot papers.
If you are planning an awards ceremony, a conference or a members’ meeting, we will show you how it would work at your event.









